BMW K Series Rearsets BSK SpeedWorks rearsets for the K75/100/1100/K1

Shopping Cart

NEW BMW K Series Rearsets

Sorry, currently not available.

These new and improved rearsets for the BMW K Series, are produced in house by BSK SpeedWorks from top quality materials and are made to the same design as fitted to our K100 race bikes.
Developed over 10 years of race use, the latest improvements include lighter weight (990g) with slimmed down, symmetrical mounting plates plus a modified adjustable brake lever stop.
The mounting plates and levers are CNC milled from a solid billet of 7075 aircraft grade aluminium. The footrests and pivot body are 1 inch alloy produced on a CNC lathe to exact tolerances.
The footrest pivots are fitted with bronze 'Oilite' self lubricating oil impregnated bushes and are fixed to the mounting plate with sturdy 10x45mm bolts.
The gear lever is reversible so can be fitted for either road or race shift pattern.
(If you require race shift pattern let us know when ordering as linkage rod length is different, otherwise road type rod will be supplied.)

This compete, ready to fit kit consists of gearbox mounting plates, levers, toe pegs, footrests, bushes, stainless steel gear change linkage rod, genuine BMW gear lever for the gear change input shaft, new 13mm Brembo master cylinder with integral reservoir, adjustable brake lever stop and all stainless fixings.

Fits K75/K100/K1100/K1 as the gearbox mounting points are the same.

Our rearsets are designed for race use, but if you need the brake pedal to operate a brake light we can supply a hydraulic banjo bolt switch to suit the Brembo master cylinder.
We can also supply a new stainless steel rear brake hose kit to suit, in clear coated or black, which comes with 2 M10x1.00 Alloy banjo bolts and washers.
If you require either of these, please tick the checkbox below the add to cart button below.

Each set is made to order and comes fully assembled, tested and ready to fit. We can usually have these ready within a day or two, but this can take longer, so please allow exta time for delivery.

Individual replacement parts are now available here: replacement parts should you need them.

For more information please get in touch.

Manufacturer: BSK SpeedWorks - Made in the U.K.

£359.00 INC VAT
£299.17 EX VAT


Banjo bolt brake light switch (+ £14.99)

Stainless Steel rear brake hose kit CLEAR (+ £34.99)
Stainless Steel rear brake hose kit BLACK (+ £34.99)

Please note:
Depending on the year/model of your bike, you may need to fit a new rear brake line to suit, due to the new position and type of master cylinder. We can supply this, please see above.
The banjo bolt thread pitch for the Brembo master cylinder supplied is M10x1.00 (Same as BMW caliper)
When working with vehicle brake parts, always get a professional to fit them if you are not experienced or qualified.

Copyright © 2012, BSK SpeedWorks all rights reserved. - In association with Oldracer
BSK Speedworks Ltd - Registered in England and Wales. Registered Number: 8145054