BMW K Series Ignition Coil, Leads and Bracket

Shopping Cart

K Series Ignition Coil, Leads and Bracket

This kit contains all the ignition parts needed for our K series engine management system, but can also be used as am aftermarket replacement for the original coils on the K.

Please note this coil comes with a 3 pin connection for use with our
k wiring harness and Engine Management Package not for the stock K series loom, although it can be used with the stock K100 wiring system in place of the OEM coils. Wiring details below.

Manufacturer: BSK SpeedWorks - Made in the U.K.

Shipping weight 2.00 kg

£178.80 INC VAT
£149.00 EX VAT

Coil pin info below:
Looking at the coil connector the HT lead terminals facing up:
Coil Pin 1 - Pin 14 on ECU (Ign output 2)
Coil Pin 2 - Pin 2 on ECU (Switched 12v power)
Coil Pin 3 - Pin 13 on ECU (Ign output 1)
These are the connections for the delta 400 ECU, not the stock K ECU.
To connect to stock K100 wiring:
Coil Pin 1 to Black/Red (coil for cyl 2+3)
Coil Pin 2 to Green/Yellow 12v
Coil Pin 3 to Black/Blue (coil for cyl 1+4)

Copyright © 2012, BSK SpeedWorks all rights reserved. - In association with Oldracer
BSK Speedworks Ltd - Registered in England and Wales. Registered Number: 8145054